Skip to content
Search AI Powered

Latest Stories

Press releases are provided by companies as is and have not been edited or checked for accuracy. Any queries should be directed to the company issuing the release.

10nm pattern generation using thermal scanning probe lithography enabled by simplified materials and

Thermal scanning probe lithography (tSPL) has been used to create patterns with sub-20 nm half pitch resolution. Pattern generation uses a thermally sensitive resist and spin coatable hard mask materials to transfer the resist patterns. Spin coatable

10nm pattern generation using thermal scanning probe lithography enabled by simplified materials and

10nm pattern generation using thermal scanning probe lithography enabled by simplified materials and processes
Thermal scanning probe lithography (tSPL) has been used to create patterns with sub-20 nm half pitch resolution. Pattern generation uses a thermally sensitive resist and spin coatable hard mask materials to transfer the resist patterns. Spin coatable materials permit users of tSPL to reduce time and cost of the patterning process.

NanoFrazor lithography
Thermal scanning probe lithography (tSPL), also termed NanoFrazor lithography, is based on heated atomic force microscope (AFM) tips to create lithographic patterns by locally evaporating a thermally sensitive resist. This process enables the fabrication of precise 3D patterns and high-resolution structures without the use of charged particles, such as electrons, which have been implicated in substrate damage. Moreover, AFM imaging is exploited for in-situ inspection of the substrate surface before patterning and of the lithographic structures written into the substrate. The immediate visual feedback of the patterning success allows fast turnaround processing which is further enhanced by the absence of proximity effects. tSPL has been pioneered at IBM Research - Zurich over the past ten years and in 2012 an independent company SwissLitho AG was founded to commercialize the technology. A huge number of applications to solve real world nano-physics problems have emerged since then.
Hard-mask pattern transfer
High resolution lithography requires the use of thin (typically 10 nm or even less) resist layers which limits the depth of the tSPL written patterns. For real world applications the depth of these shallow resist patterns needs to be amplified at the device level. A two-step etch-transfer process involving an extremely thin inorganic hard-mask layer and a thicker organic resist mask has been developed for the transfer of high resolution tSPL resist patterns. In a first step the shallow tSPL lithographic pattern is transferred into the inorganic hard-mask by means of reactive ion etching (RIE). SiO2 rich inorganic hard masks with a thickness of only 2-3 nm have been found to be ideal for this process yielding high resolution and low line edge roughness patterns. The thin hard-mask layer is sufficient for the subsequent RIE transfer into the second much thicker organic mask layer. A wide range of carbon based resists compatible with typical industry processes including metal lift-off can be used for the organic mask.
Fabrication of the extremely thin SiO2 rich hard-mask layer in a uniform and pin-hole free manner is absolutely crucial for the whole transfer process to be successful at sub-20 nm half-pitch resolution. The deposition of such thin films of sufficient quality by means of established methods like sputtering or evaporation has been rather challenging. SwissLitho and PiBond have jointly developed a Si hard mask and a process to solve exactly this problem in a user-friendly way that requires only a simple spin coater for the reliable fabrication of the thin inorganic hard mask layer.
Felix Holzner, CEO of SwissLitho, says: "The Si hard mask developed by PiBond is an extremely important step forward, significantly simplifying the hard-mask pattern transfer scheme for our customers."
About SwissLitho
SwissLitho develops, manufactures and sells innovative tools, termed NanoFrazor, for direct write nano-lithography. The principle of operation is based on heated cantilevers and thermally responsive resists. The innovative patterning process enables the fabrication of complex 3D nanostructures with unmatched precision and high density lithography down to sub-10 nm half-pitch resolution. Wet development and vacuum is not needed for this direct write process and samples are not exposed to high-energy electron beams. This novel technology enables easy rapid-prototyping of high-quality nanostructures also on delicate samples for a broad range of nanotechnology applications. The flag ship product "NanoFrazor Explore" was successfully introduced to the market in 2014. In 2017 a table-top entry-level tool "NanoFrazor Scholar" was added to the product portfolio. In addition, SwissLitho continuously develops unique processing know-how to support customers in their applications that often go beyond what is possible by means of conventional nanolithography approaches.
About PiBond
PiBond is a leader in the development and production of advanced liquid spin-on materials based on organosilicon and metal oxide cHemiätries. PiBond has a proven track record of materials innovation and manufacturing for the semiconductor industry. PiBond's technology and state-of-the-art production plant, and products are key contributors in the production of the latest ultra-high resolution semiconductor devices used in mobile devices, electric vehicles and wearables. PiBond provides products globally with a proven and audited track record, meeting the standards for reliability and high quality demanded by the semiconductor industry.


PiBond Oy
Kutojantie 2B, 02630 Espoo, Finland
info@pibond.com - www.pibond.com

SwissLitho AG
Technoparkstrasse 1, 8005 Zurich, Switzerland
sales@swisslitho.com - www.swisslitho.com

More Info: https://ins-news.com/en/100/930/2533/10nm-pattern-generation-using-thermal-scanning-probe-lithography-enabled-by-simplified-materials-and-processes.htm

The Latest

Artificial Intelligence

AI: Is it the real deal?

More Stories

photo of exotec as/rs

Exotec Launches Next Generation of Skypod System, an All-in-One Robot-Based AS/RS

Atlanta, GA, Feb 6, 2025 - Today Exotec®︎, a global warehouse robotics provider, announced the commercial launch of the Next Generation of Skypod®︎ system with higher performance, improved storage density, and advanced software features.

The Next Generation of Skypod comes with a number of design improvements including a new and more compact Skypod robot, a workstation for robot-to-robot picking, high-throughput Exchanger, and denser storage. These redesigns combined with new software features improve the throughput at a single workstation by 50% while also enhancing storage density up to 30% compared to the previous generation.

Keep ReadingShow less

Featured

Vanderlande to Showcase How to Automate Your Warehouse Success at ProMat 2025

ATLANTA– February 5, 2025Vanderlande, the global partner for future-proof warehouse solutions, today invited ProMat 2025 attendees to visit booth #S1503 to learn more about the fully integrated technologies, best-of-breed solutions and comprehensive services available to warehousing operations regardless of where they are in their automation journeys. Vanderlande experts will also present two interactive conference seminars that will draw on real-world examples and lessons learned to show attendees how they can successfully deploy automation for the faster and more efficient warehousing needed to stay competitive and thrive.

Known for providing leading global brands with the most advanced distribution centers (DCs), Vanderlande offers the fully-integrated and comprehensive suite of solutions dynamic retailers, including omnichannel brands and e-commerce companies in the general merchandise, apparel and food sectors, need to excel. The company’s automation technologies encompass the systems, software, robotics and services needed to optimize throughput, order accuracy and storage capacity in the most demanding fulfillment and store replenishment operations.

Keep ReadingShow less

Warp Announces Preparation for U.S. Government Partnership to Enhance Service and Efficiency

Los Angeles, CA, Jan. 29, 2025 (GLOBE NEWSWIRE) -- Warp, a tech-powered network of cross-docks and carriers offering various vehicle sizes, announced that 2025 it will extend its solutions and services to the U.S. government. Warp aims to modernize government freight logistics with machine-learning-driven planning, optimized network strategies, and flexible solutions to create efficient, cost-effective, and sustainable supply chain transportation.

Focused on optimizing every load, every time, Warp employs machine learning (ML), artificial intelligence (AI), and groundbreaking consolidation techniques to blur the traditional lines of freight shipping by combining the best elements of LTL, FTL, and parcel delivery. Using its homogenous fleet including cargo vans, sedans, box trucks, and 53-foot trailers, Warp facilitates carrier injections, inbound vendor consolidation, pool point distribution, zone-skipping, store replenishment, and national retail distribution for some of the world’s largest shippers.

Keep ReadingShow less
Toyota Material Handling MidSouth’s Forklift Donation Raises $40,000 for Higher Education

Toyota Material Handling and Toyota Material Handling MidSouth partner to donate 5,000-pound-capacity pneumatic forklift at Concrete Industry Management’s annual charity auction.

Photo courtesy of Toyota Material Handling

Toyota Material Handling MidSouth’s Forklift Donation Raises $40,000 for Higher Education

LAS VEGAS, Jan. 28, 2024 – Toyota Material Handling MidSouth, a full-service dealer for Toyota Material Handling, showcased its dedication to fostering the next generation of industry professionals by donating a 5,000-pound-capacity Toyota Core IC Pneumatic forklift to the Concrete Industry Management’s (CIM) annual charity auction on January 22.

The forklift’s winning bid of $40,000 significantly contributed to the auction’s total proceeds of $2.15 million, supporting CIM’s mission to address the growing demand for skilled professionals in the concrete industry. Offered at five universities, CIM equips students with technical, communication and management expertise, preparing them for successful careers in a rapidly evolving industry. Proceeds from the auction are used to assist CIM in funding higher education programs that offer degrees in concrete industry management.

Keep ReadingShow less

Chang Robotics launches 'The Chang Robotics Fund' - A Seed Stage Venture Capital Fund targetting a $50M Raise to Specialize in Disruptive Technology

JACKSONVILLE, Fla., Jan. 27, 2025 /PRNewswire/ -- 2,750 miles away from Silicon Valley, Matthew Chang, founder of Chang Robotics, today announced his next business venture: The Chang Robotics Fund. The Fund is targeting a $50M raise to address the numerous needs and market opportunities the Chang Robotics engineering team identified in their daily operations by investing in disruptive technologies designed to confront the industry's most urgent challenges—from labor shortages to energy efficiency to environmental remediation. By utilizing innovative intellectual property and the engineering and management expertise of Chang Robotics, the Fund seeks to scale its targeted innovations into impactful, transformative, and profitable businesses.

Global industries, from manufacturing to healthcare, face mounting pressures such as intensifying global competition, workforce constraints, escalating expenses, and the urgent need for environmental restoration. Tackling these issues demands a new paradigm of intelligent automation, energy efficiency, and sustainable innovation.

Keep ReadingShow less