MicroZone and OutRunner Spiral conveyors

SpanTech has unveiled two conveyors, the MicroZone and the OutRunner Spiral. The MicroZone conveyor is a new 24-volt, low-profile, zero pressure accumulation conveyor system. Each standard 300mm by 300mm zone is individually driven by a 24 volt "pancake" motor. Shaft-mounted sprockets engage with the 5 mm pitch MicroSpan plastic chain for positive tracking.

Unlike traditional side frame designs, each MicroZone unit is made from a two-piece fabricated assembly. The drive, sprocket, belt, and end roller assembly can be removed or replaced in seconds. MicroZone units are individually bolted together to form a modular conveyor system for maximum design flexibility, making it suitable for kitting, assembly, order fulfillment, and returns applications. The conveyor can be installed overhead or floor-mounted on casters. Optional automated transfer devices are available.

The OutRunner Spiral is a drum-less powered incline/decline spiral. Although the device is driven by a single gear motor, each 360-degree revolution is individually driven. This design allows each tier to share the load, providing flexibility in loads, speeds, and incline angles. Customers can choose from a wide range of configurations.

Company: Span Tech, LLC

Company Phone: (270) 651-9166

Company URL: www.spantechllc.com